Traditional mortise and tenon construction has always been associated with high quality cabinets and furniture. Even though highly desir­able, it is being used less and less today because of the diffi­culty and cost of producing really good quality joints. Now, high quality mortise and tenonjoints are both fast and easy, even for totally custom sizes.

The difficulty with mortise and tenon joints is that the mortise and the tenon must be cut separately but must fit together pre­cisely. To accom­plish this, using traditional mechanical methods, requires that every mechanical part, down to the cutting tool, be machined and adjusted perfectly. While you might be able to produce a precise mechanical machine, exact tooling and perfect adjustment is just not practical in today's woodworking industry.

Mortise /Tenoner Machine Specifications:

Capacity 1-1/4" x 6" 2-112 axis
5 HP, 18,000 RPM Spindle 112" Collet Max.
Utilities Required:
90 PSI Air
440 VAC 3 Phase (other voltages optional) 800 CFM Dust Collection
Can randomly call 8 different Mortise/Tenon Programs during operation.

Thermwood's CNC Mortise and Tenon Machine substitutes an intelligent control for unrealistic mechanical tolerances.

The machine is simple to use. To cut a tenon, slide the part into the clamp and press a button.
The mortise is about as simple. Slide the part into the cross clamp, align the piece and press a button. The cross scribes produced by Thermwood's CNC Length Processor can be used for alignment, or you can simply mark the part where you want a mortise.

General condition : Like New.